pro.point 9040643, Manual

Page: 9 / 32

V1.0 Low-Profile Air Impact Wrench 9040643
Visit www.princessauto.com for more information 9
1. Connect the tool to the appropriate air source.
2. Place the tool’s tip (A) over the fastener.
2.1 Always use the simplest tool-to-fastener setup to avoid
reduction in power or performance of operation.
3. Assess whether you wish the tool to moving in the forward
(clockwise) or reverse (counterclockwise) direction.
3. Use the air regulator (C) to select the appropriate amount of air
output.
3.1 The lowest output setting has the thinnest marking, and the
highest output setting has the largest mark.
3.2 There is no ability to adjust output when operating in the
reverse (counterclockwise) direction.
4. Holding the handle (#21) firmly, use the variable speed trigger (D) to
engage the tool.
4.1 If the fastener does not move within five seconds, you may need
to use a larger or different tool.
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or replaced by
an authorized technician. Only use identical replacement parts when
servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool clean, dry and free from oil/grease at all times.
6. Clean the air inlet weekly.
7. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.