9040643
Low-Profile Air Impact Wrench
V1.0
10
For technical questions call 1-800-665-8685
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user and/or others.
Lubricate the air motor daily with high quality air tool oil. If no air line oiler
is used, run 1/2 oz. of oil through the tool. The oil can be squirted into the
air inlet or into the hose at the nearest connection to the air supply.
After this tool has been lubricated, oil will discharge through the exhaust
port during the first few seconds of operation. The exhaust port must be
covered with a towel before engaging with the air source to prevent
serious injury.
Do not lubricate this tool with flammable or volatile liquids such as
kerosene, diesel or jet fuel.
NOTICE! NEVER use a penetrating oil to lubricate
the tool. Penetrating oil may act as a solvent
that will break down the grease and cause the tool
to seize up.
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil.
Visit a Princess Auto Ltd. location for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a qualified
technician service the tool.
Specific factors may cause the loss of power or erratic action. These can
include the following:
•
Reduced compressor output
•
Excessive drain on the air line
•
Moisture or restrictions in air pipes/lines
Summary of Contents for 9040643
Page 12: ...9040643 Low Profile Air Impact Wrench V1 0 12 For technical questions call 1 800 665 8685 ...
Page 15: ...V1 0 Low Profile Air Impact Wrench 9040643 Visit www princessauto com for more information 15 ...
Page 16: ...9040643 Low Profile Air Impact Wrench V1 0 16 For technical questions call 1 800 665 8685 ...
