SERVICE THE AIR FILTER
NOTICE! Operating the engine with a damaged or missing
air filter will allow dust and debris to enter the engine,
causing rapid engine wear or scoring on the engine pistons.
Always ensure the air filter is in place.
A dirty air filter will restrict airflow to the carburetor, reducing the
engine’s performance. Clean the air filter more frequently than
specified in the maintenance schedule if the engine is used in dusty
areas.
1.
Remove the air cleaner’s outside cover. Do not allow dirt and
debris from to fall into the air cleaner assembly.
2. Remove the air filter from the air filter housing.
3. Clean the housing interior with warm soap and water. Allow to dry
before reassembly.
4. Inspect the air filter to see if you can clean it or if it should be
discarded. Discard if it is too dirty and replace with a new filter.
a. Clean dirty air filter with warm water and mild soap or a non-
flammable solvent. Replace the water as necessary, until the
water is no longer dirty. Do not use a flammable solvent to
clean the foam filter. The solvent may dissolve or clog the
filter. Dispose of the oil contaminated water in accordance with
your local by-laws.
b. Allow air filter to dry.
c. Dip the filter into clean engine oil and squeeze out excess.
The engine may produce smoke when started for the first time
after the filter is replaced. This is excess oil from the filter and
the effect is temporary.
5. Reinstall the filter into the housing and secure in place.
6. Install the air filter assembly onto the carburetor and secure with
screw.
8953176
4,5000W GASOLINE INVERTER GENERATOR
V1.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 16
