11. Ensure a skilled electrician connects the generator when
incorporating the generator into a home power circuit. A properly
installed transfer switch is required. An improper connection can
damage the house’s electrical system, generator and any attached
appliances or cause a fire.
TURN OFF THE GENERATOR
1.
Turn the ECO switch to the OFF position.
2. Switch all breakers to the OFF position.
3. Turn the engine switch to the OFF position. Consult the Engine
manual as additional steps may be required.
4. Set fuel valve lever to the OFF position
IMPORTANT! To stop the generator in an emergency, turn
the main generator switch to the OFF position.
ENGINE OVERLOAD INDICATOR
The overload indicator glows when the connected electrical devices
exceeds the generator’s wattage/amperage capacity or by a power
surge. The engine continues to run, but power is no longer supplied to
the outlets until the generator is reset.
The engine overload indicator light may turn on for a few seconds when
attaching a load due to a power surge. This is normal.
RESETTING THE GENERATOR
The circuit breakers automatically turn OFF when the wattage of
connected electronic devices exceeds the generator’s rated output.
This can be caused by overloading the generator's circuits or a
reduction in engine efficiency.
1.
Re-establish DC power by pushing the DC reset button. Re-
establish AC power by pushing the AC reset button for the specific
outlet
2. Stop the engine if the circuit breaker trips again.
3. Unplug all devices.
4. Inspect the air inlet and control panel for any blockage. Remove
blockage if found.
V1.0
4,5000W GASOLINE INVERTER GENERATOR
8953176
Page 11
Assistance available at www.princessauto.com or 1-800-665-8685
