pro.point 8345233, User Manual

Page: 4 / 16

1" Super Duty Impact Wrench
4
For technical questions call: 1-800-665-8685
8345233 V 1.49
perSOnal SaFety
1. Use eye, face, head, breathing and ear protection. Always wear ANSI approved impact safety goggles, which
must provide both frontal and side protection. Protect your hands with suitable gloves. Protect your head from
falling objects by wearing a hard hat. Wear ANSI approved earplugs.
2. Do not over reach; keep proper footing and balance at all times. Proper footing and balance enables better
control of the tool in unexpected situations.
3. Dress properly, wear protective equipment. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Tie back long hair. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working.
4. Stay alert, watch what you are doing and use your common sense. Do not operate any machine or tool when
you are tired, under the influence of drugs, alcohol or medications.
5. Use clamps or other practical ways to secure and support the work piece to a stable platform. Holding the
work piece by hand or against your body is unstable and may lead to loss of control.
SpecIFIc SaFety precaUtIOnS
1. Do not over-tighten nuts. They could shatter and cause damage to the tool or workpiece or cause serious
injury. Use a torque wrench to torque the nut after using the impact wrench.
2. Do not use any additional force upon the wrench in order to remove a nut.
3. Do not allow wrench to run without load for an extended period of time as this will shorten its life.
4. This impact wrench should only be used with impact sockets and extensions. Use of other accessories can
cause them to break, causing permanent damage to the unit and severe injury to the operator.
tOOl USe anD care
1. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger
industrial tool. The tool will perform better and more safely at the task for which it was intended. Do not modify
this tool or use for a purpose for which it was not designed.
2. Securely hold this tool using both hands. Using tools with only one hand can result in loss of control.
3. Maintain tools with care. Keep tools clean, and in good condition for a better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool fittings, alignment and hoses periodically
and, if damaged, have them repaired by an authorized technician or replaced. The handles must be kept
clean, dry and free from oil and grease at all times. A properly maintained tool reduces the risk of binding and
is easier to control. Applying excessive force can lead to slips and damage to your work or personal injury.
4. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or
machine before connecting it. A wrench or key that is left attached to a rotating part of the tool increases the
risk of personal injury.
5. Avoid unintentional starts. Be sure that the throttle is in neutral position when not in use and before connecting it
to any air source. Do not carry the tool with fingers near or on the switch.
6. Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants may not be
suitable and may damage the tool or even make the tool explode.
7. When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust.
8. Maintain label and name plate on the tool. These carry important information. If unreadable or missing,
contact Princess Auto for a replacement.
ServIce
1. When servicing, use only identical replacement parts. Only use accessories intended for use with this tool.
2. For your safety, service and maintenance should be performed regularly by a qualified technician.