pro.point 8345233, User Manual

Page: 3 / 16

1" SUper DUty
IMpact Wrench
3
For technical questions call: 1-800-665-8685
8345233
V 1.49
SpecIFIcatIOnS
No load speed 6,500 RPM (max.)
Max. torque 1,400 ft-lb*
Working torque 750 ft-lb*
Air inlet 3/8” NPT
Average air consumption 6.7 CFM @ 90 PSI
Impact rate 1,050 BPM
1”square drive
* The actual torque delivered at each setting will depend on the air pressure supplied to the tool. Test the actual torque by tightening a nut or
bolt at each setting, then observing the resultant torque with a mechanical torque wrench (not included).
IntrODUctIOn
This line of super duty impact wrenches has a lightweight composite body, meaning less fatigue for users.
Through precision machining and high quality componentry, they can reach higher torques.
IMpOrtant SaFety precaUtIOnS
WARNING!
read and understand all instructions before using this tool. Failure to follow all instructions may result
in personal injury. Keep this manual for the safety warnings and precautions, operating, inspection
and maintenance instructions. When using this tool, basic precautions should always be followed
to reduce the risk of personal injury and/or damage to the equipment. note that when this manual
refers to a part number, it refers to the parts list included.
WOrK area
1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use in damp or wet locations. Do not expose to rain.
Do not use in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Distraction can cause you to lose control. Do
not let them handle tools, hoses or extension cords. No one should be in the work area if they are not wearing
suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust.
Always lock up tools and keep them out of reach of children.