master mechanic 147616 Owner'S Manual Download

Page: 1 / 20

12V SUB COMPACT LITHIUM ION

IMPACT DRIVER

147616

Owner’s Manual

PRODUCT SPECIFICATIONS

Battery:

12V, 1.3 Ah Li-ion

Variable speed:

–2,200 RPM (no load)

Impact speed:

–3,000 IPM (impacts per minute)

Impact torque:

796 in/lbs (maximum)

Hex drive

1/4“ Quick release

Charger:

–50 min diagnostic, Class 2

Charger input:

120 VAC, 60 Hz

Charger output:

12 VDC, 2.2 A (maximum)

Weight:

2 lb 3 oz (0.99 kg)

12V Li-ion replacement battery

#138809

12V Li-ion replacement charger

#138808

Need Assistance?

Call us on our toll free customer support line:
1-866-349-8665 Monday

– Friday from 9am to 5pm

Eastern Standard Time



Technical questions



Replacement parts



Parts missing from package

Manufactured For and Distributed By
True Value® Company, Chicago, IL
©2012 True Value Company
Made in China

NOTE:

The 12V Sub

Compact  Lithium Ion 2
Piece Tool Kit (Impact
Driver and Drill) #151367.

Included Accessories:
1-Hour Diagnostic Fast
Charger #138808
2-12V Li-ion Batteries
#138809

Summary of Contents for 147616





















Search results

Summary of Contents for 147616

Reviews:

Related manuals for 147616

Brands by name

Popular brands

master mechanic 147616, Owner'S Manual

Search results

Summary of Contents for 147616

Reviews:

Related manuals for 147616

Brands by name

Popular brands