III
TROUBLESHOOTING
I press RUN/STOP and the sign doesn't respond?
•
Try using a fresh new set of batteries.
•
Make sure the battery polarities are inserted in the correct direction.
•
Stand 5’ from the sign and point to the top left hand corner of the sign.
My sign does not show the
Trivia-In-Motion
.
•
Make sure the Trivia is enabled by pressing the
FUNCTION
key while
your message is running.
•
You can use the enclosed 30-Day TRIAL software to upload the TRIVIA to
the sign.
The sign keeps flashing, "CHECKING".
•
Check the label on the power supply and see if the output is rated at
9VAC - 2.5 AMPS or higher.
I plugged the sign in but nothing comes ON?
•
Unplug the power to the sign and plug it in again.
•
Make sure the 9VAC plug is plugged into the sign firmly.
•
Try using another outlet.
The sign does not keep memory.
•
Program a short message and leave it running for at least 72 hours for the
built-in battery to fully charge.
•
Once fully charged, the memory will be retained for up to 30-days without
power.
•
Sudden power outages will interfere with sign function and cause
programmed messages to be lost. As a precaution we suggest using a
Power Surge Protector for added reliability.
I forgot my PASSWORD. How do I get back in to erase it?
•
Stand 4' from the sign and hold down the
ESC
key while disconnecting
the power from the sign.
•
Now hold down the
ESC
key again while plugging the power to the sign.
•
Once you have successfully bypassed the password, go back to the
SETTINGS to delete or set a new password.
**You may need to repeat steps 1 and 2 several times to bypass the password.
I pressed the F2 key and my sign blanked out?
The
F2
key is a technical support feature ONLY. If pressed accidentally while
in STOP MODE, simply remove the power to the sign, wait 30 seconds and
power up sign again.
Online: http://www.pro-lite.com/support
E-mail: [email protected]
