II
I programmed Pages A, B, and C. But when I press RUN/STOP only Page
A will show. How do I get all of my Pages to run together?
Please refer to instructions on page 11.
I program and run my message, but it shows characters I don't want.
This is usually a programming error. Edit your message and use the arrow keys
to locate the unwanted characters. When you locate them, press
DEL
to
remove the unwanted characters. Please refer to instructions on page 4.
How do I display the animated graphics?
The animated graphics are part of the effects category. There are a total of 8
animated graphics. "COMIC 1" displays two animated graphics and "COMIC2"
displays 6 different animated graphics. Animated graphics are random and not
user selectable. Please refer to the instructions on page 6.
Can I change the color of the TIME and DATE?
No, these colors are fixed.
How do I display lower-case letters?
Select lower-case mode. Please refer to instructions on page 7.
TARGET counter facts...
•
Running multiple pages when the target is reached is not supported.
•
The color of the target counters cannot be changed.
•
Both counters (Count Up and Count Down) cannot run simultaneously.
•
The target counter will only work effectively when the current Time/Date
is set on the sign prior to configuring the target function. Refer to page 11.
•
Interruption of power will cause the target function to reset..
How do I slow the speed of the display?
In most cases, you are standing too close to the sign. The sign is designed to
attract attention from an average of 15' to 100' away. Stand back at least 20 feet
to view the speed of your message. If the speed is still too fast, simply use the
"DOWN" arrow key to set the speed slower. To increase the speed, press the
"UP" arrow key.
How much text can I program onto each PAGE?
Memory usage is based on how you use characters, colors, effects, and graph-
ics in your message. These items range from 1 byte to 126 bytes each. The
TruColorXP
has 64000 bytes (64k) of Jumbo Memory.
I saw Strobe Lights flashing in the demo message. How do I put them in
my message?
The Strobe Lights (flashing red LED lights on the endcaps) are a perfect way to
increase information awareness. You can put the strobe function at the begining
of your message to announce something exciting or emergency instructions.
The Strobe Lights can only be accessed via the TruColor software. Try the
included 30-day trial software to find out how seamlessly this feature works!
