10
INSTALLATION AND OPERATING INSTRUCTIONS
1. Ensure the unit is placed on a properly leveled surface. Plug
the unit into the appropriate power outlet.
2. Ensure that the water bath contains water before starting the
machine. The water must be filled up to a level where the food
pouches will be completely submerged and over the ‘MIN’
water level mark on the sidewall of the water bath container.
Note: The machine will refuse to start if water level is below
the ‘MIN’ mark. An error signal ‘E001’ will appear on the
display panel.
Tip: Fill with warm water to speed up the time needed to reach the
desired water temperature.
3. Touch and hold down the Power button. The unit will beep and
the LED display screen will show the current temperature of
the water in the water bath.
SET COOKING TEMPERATURE
4. Touch the Set Temperature button. The default temperature
of 60
o
C will flash on the display screen, meaning that it is
ready to be changed. Touch the – and + buttons to decrease
or increase the temperature to set to your desired target
temperature.
Note: The temperature set range is 30
o
C – 90
o
C.
Tip: Holding down the – or + button will change the temperature
figure more quickly.
OPERATION INSTRUCTIONS
