Lights
For operation at night your Pro-Line is equipped with navigation, and anchor lights to indicate your
position to other boaters. While running after dark the nav. lights are required to be on and visible
to other boaters, visually verify operation and lack of obstructions. Lights are also provided for the
cockpit, helm and cabin, as well as spreader lights.
Breaker Switches
The wiring on your Pro-Line is protected by circuit breaker or fuse. If a device stops working first
suspect the circuit breaker is tripped (or fuse blown).
A tripped breaker will protrude from its set position, indicating that the circuit has been overloaded.
Turn off the device(s) on the circuit then reset the breaker by pushing in once. If the breaker does
not reset, or if it resets and then pops out again after the device is turned back on, then a short
circuit exists, or your device may be damaged, overloaded or faulty. Correct the problem and then
reset the breaker. If the breaker continues to pop and you are certain the device, switch and wiring
are in good repair; either the breaker is too small for the load, or is faulty. Reduce the load, or
replace the breaker.
