Seating
The 23 Bay has a wide variety of
seating throughout the forward and
aft cockpit.
There is an aluminum leaning post
(powder coated) with rod holders,
and cooler at the helm.
The seating installed forward of the
console includes a seat cushion and
storage (baitwell tub) below.
The center of the aft casting decks
lifts up to reveal transom seating
(optional).
Removing the transom seat cushion
provides access to the bilge. Lift
the transom seat cushion up and
slide it forward to remove.
Additional optional seating includes:
•
Removable casting pedestal seat to the forward or aft casting decks.
•
Aluminum leaning post with rod holders and cooler. Includes grad rails/handles on the sides of
the seat.
Windshield
The Plexiglas windshield assembly is molded to fit the console
DO NOT use commercially available glass cleaners containing harsh chemicals such as ammonia or alcohol as
this will permanently damage the windshield. Please refer to the Service and Care section of this manual for
cleaning recommendations.
A stainless steel grab rail has been installed around the windshield to assist with navigating around the cockpit.
This grab rail is not applicable if you have selected the optional T-top.
Please refer to the Service and Care section of this manual for cleaning recommendations.
T-Top - Canvas (Optional)
The power coated aluminum frame comes with a canvas T-top made from high quality Sunbrella material. See
the Service and Care section of this manual for cleaning recommendations for the anodized aluminum frame and
fiberglass hard top.
Note: Pro-Line DOES NOT offer outriggers on this model. When outriggers are factory installed
on some of our other models, we install mounting pads to the frame for additional support.
29
