
Pro Lighting e.K., Tannenstr. 9, 85609 Aschheim, Tel. +49 89 9077869-0, www.prolighting.de
CAUTION! EYE DAMAGES!
Avoid looking directly into the light source
(meant especially for epileptics) !
Important:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
During the operation the housing becomes hot. Allot the fixture to cool approximately 20 minutes prior to
manipulate with it.
Make sure that the available voltage is not higher than stated on the rear panel.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to
completely remove power from unit when not in use or before cleaning or serving the fixture.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Neve pull out the plug by tugging the power cord.
This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to
earth.
The electric connection, repairs and servicing must be carried out by a qualified employee.
Do not connect this device to a dimmer pack.
Do not switch the fixture on and off in short intervals as this would reduce the lamp’s life.
During the initial start-up some smoke or smell may arise. This is normal process and does not
necessarily mean that the device is defective.
Do not touch the device’s housing bare hands during its operation (housing becomes hot)!
For replacement use lamps and fuses of same type and rating only.
2.
PRODUCT DESCRIPTION AND CONTENTS OF THE PACKAGE
FRAME PAR 7x12 is equipped with 7 colour LEDs, which are characterized by high brightness and stability.
Unpack the device carefully and check if it has not been damaged in transport. Also check that all the following
items are included: