9
OPERATION
1. Adjust height by pulling up on ratchet
bar.
2. The weight of the locking handle
should secure the ratchet bar in desired
position. To confirm this, simply push
down on the locking handle. Check
to ensure ratchet is secure before
loading.
3. Carefully position jack stands so that
load is centered on stand’s saddle.
4. Slowly lower the vehicle onto the
stands.
5. Check to ensure vehicle is secure
before working on, around or under.
When used to support vehicle, use
wheel chocks to prevent inadvertent
movement.
To lower load
1. With suitable jack, raise vehicle clear
of stands.
2. Carefully release stopper and allow
ratchet to glide down to lowest
position.
3. Carefully remove stands, then carefully
lower vehicle with lift device.
4. Ensure that all tools, equipment and
personnel are clear before lowering
load.
MAINTENANCE
Periodically inspect each stand. Ensure
all parts move freely. Do not apply oil or
grease to any portion of this product. If rust
appears, sand affected area and cover
with suitable utility paint. Please note that
there are no replacement parts applicable
to this device.
Storage
Store stands in upright position and in a
clean, dry area.
