7
BEFORE USE
1. Inspect stands before each use. Do
not use if bent, broken or cracked
components are noted. Ensure that all
parts move freely.
2. Verify that the product and the
application are compatible, if in doubt
call
Pro-Lift Customer Support @
(888) 332-6419.
3. Before using this product, read the
owner’s manual and familiarize yourself
thoroughly with the product and the
hazards associated with its improper
use.
4. Install ratchet bar into frame with ratchet
portion of bar aligned with locking pawl
(stopper).
5. Move the ratchet bar to its lowest
position by raising the locking handle,
thereby releasing the stopper, and
guiding the bar downward.
y
b
d
e
h
s
il
p
m
o
c
c
a
s
i
k
c
o
l
r
a
ll
o
c
/t
e
h
c
t
a
R
.
6
simply moving the press tab (Fig. 3)
inward using a suitable hammer and
punch. This will effectively prevent
inadvertent loss of the ratchet bar.
7. Always check the vehicle owners or
service manual for location of proper
lift and support points.
Figure 3 - Typical Jack Stand
Nomenclature
saddle
ratchet bar
press tab
locking
handle
frame
stopper
Save these instructions.
For your safety,
read and understand the information
contained within. The owner and
operator of this equipment shall have an
understanding of this product and safe
operating procedures before attempting
to use this product. Instructions and
safety information shall be conveyed in
the operator’s native language before
use of this product is authorized. If any
doubt exists as to the safe and proper use
of this product as outlined in this factory
authorized manual, remove from service
immediately.
Inspect before each use.
Do not use if broken, bent, cracked, or
damaged parts (including labels) are noted.
If the jack stand has been or suspected to
have been subjected to a shock load (a
load dropped suddenly and unexpectedly
upon it), discontinue use until checked out
by an authorized factory service center. It
is recommended that an annual inspection
be done by qualified personnel and that
any missing or damaged parts, decals,
warning/safety labels or signs be replaced
with factory authorized replacement parts
only. Any jack stand that appears to be
damaged in any way, is worn or operates
abnormally shall be removed from service
immediately.
PRODUCT DESCRIPTION
Pro-Lift Jack Stands are designed to
safely support level, rated capacity loads,
typically vehicles, for extended periods.
Stamped steel construction and ductile
iron ratchet bars ensure safety, strength
and stability. Each comes with a ratchet/
collar lock which prevents inadvertent loss
of ratchet bar.
2 Ton (Per Pair) Jack Stands
