15
HOW TO FOLD AND STORE THE DUAL TRAINER
The dual trainer can be stored in a folded position to
conserve space. Store the dual trainer in a location
where children cannot tip it. Remove the batteries from
the console when storing the dual trainer for extended
periods.
Follow the instructions at the right to fold and store the
dual trainer.
1. Raise the foot plate.
Pull the foot plate knob, raise
the foot plate, and then release the foot plate knob
into the hole in the front frame (see assembly step
9 on page 10).
IMPORTANT: The foot plate
must be raised when you fold the dual trainer,
or damage may occur to the foot plate.
2. Remove the row bar if desired.
Remove the row
bar from the row bar clip on the strap (see assem-
bly step 11 on page 11). Then, insert the row bar
into the storage clip on the rear frame.
3. Remove the backrest if desired.
Remove the
backrest from the seat carriage (see assembly step
8 on page 10). Then, slide the backrest onto the
storage screws on the rear frame.
IMPORTANT: If you choose not to remove the
backrest, you must adjust the seat carriage to
the rearmost adjustment hole in the rail before
you fold the dual trainer, or damage may occur
to the backrest and the console.
4. Fold the dual trainer.
Fully loosen the lock knob
on the rear of the dual trainer. Next, loosen and pull
the storage knob, grip the rail cap, raise the rear
frame into the storage position, and then release
the storage knob into the storage hole in the rail
bracket.
HOW TO UNFOLD THE DUAL TRAINER
To unfold the dual trainer, pull the storage knob, grip
the rail cap, lower the rear frame to the floor, and then
tighten the storage knob. Then, tighten the lock knob
on the rear of the dual trainer.
Make sure to tighten
the storage knob and the lock knob.
1
2
3
4
