9
5. Attach the Rail Bracket (8) to the underside of
the Rail (5) with four M8 x 20mm Screws (15);
start all the Screws, and then tighten them.
See step 4.
Tighten the M8 x 20mm Screws (15).
5
8
5
4
5
6. Orient the Seat Carriage (4) as shown.
Pull the Seat Knob (93), slide the Seat Carriage
(4) onto the Rail (5), and then release the Seat
Knob into one of the adjustment holes (not
shown) near the front of the Rail.
6
7
7. Attach the Rail Cap (82) and two Bumpers (65)
to the Rail (5) with two M4 x 16mm Screws
(84), two M5 x 20mm Screws (81), and two M6
Washers (34);
start all the Screws, and then
tighten them.
15
93
82
81
84 65
5
65
34
15
84
