10
7
7. Set the console assembly face down on a
soft surface to avoid scratching the console
assembly.
Remove and discard the two screws (B) from
the Console Crossbar (61). Then, remove the
Console Crossbar.
Console
Assembly
B
61
B
6. Identify the Right Handrail (64). Have a second
person hold the Right Handrail near the Right
Upright (76).
Route the Upright Wire (63) into the bottom of
the Right Handrail (64) and out of the hole in the
Right Handrail.
Be careful not to pinch the Upright Wire (63).
Insert and partially tighten a 5/16" x 3/4" Screw
(5) with a 5/16" Star Washer (6) into the Right
Upright (76) and the Right Handrail (64). Then,
partially tighten a 5/16" x 3" Screw (7) with a
5/16" Star Washer (6) into the Right Handrail
and the Right Upright.
Do not fully tighten the
Screws yet.
Attach the Left Handrail (not shown) in the
same way.
Note: There are no wires on the left
side.
76
63
5
64
6
6
7
6
Summary of Contents for 530 ZLT PETL59814.0
Page 27: ...27 NOTES...
