Pro-Form 530 ZLT PETL59814.0, User Manual, Page: 8 / 32

8
3. Identify the Right Upright (76). Have a second
person hold the Right Upright near the Base
(74).
See the inset drawing. Tie the wire tie in the
Right Upright (76) securely around the end of the
Upright Wire (63). Then, insert the Upright Wire
into the lower end of the Right Upright as you
pull the other end of the wire tie out of the top of
the Right Upright.
74
76
63
76
Wire
Tie
Wire
Tie
3
63
2. Make sure that the power cord is unplugged.
Remove and discard the two screws (A) and the
shipping bracket (B) on the right side of the Base
(74). Then, remove and discard the screws
and the shipping bracket (not shown) on the
left side of the Base.
Next, remove the tie securing the Upright Wire
(63).
Then, press a Base Cap (70) into each side of
the Base (74).
2
B
A
74
Tie
63
70