Pro-Form 23937.0, User Manual

Page: 8 / 32

8
3. If there is a shipping tube (not shown) attached
to the Frame (1), remove the screws (not shown)
and then remove the shipping tube. Discard the
screws and the shipping tube.
Orient the Front Stabilizer (3) so that the sticker
is facing away from the front of the Frame (1).
With the help of a second person, place some
of the packing materials (not shown) under the
front of the Frame (1).
Tip: Make sure to lift the Pedal Arms (16, 17)
above the Front Stabilizer (3) before you
attach it. Attach the Front Stabilizer to the
Frame (1) with two M10 x 82mm Screws (70).
Then, remove the packing materials from under
the front of the Frame (1).
3
1
70
3
4
2
61
62
A
1
4. With the help of a second person, raise the
Upright (2) to the vertical position.
Secure the Upright (2) to the Frame (1) with an
M10 x 75mm Bolt (61) and an M10 Locknut (62).
Then, tighten the indicated M10 Locknut (A).
16
17