background image

20

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console 

sound system while you exercise, plug a 3.5 mm male 

to 3.5 mm male audio cable (not included) into the 

jack on the console and into a jack on your personal 

audio player; make sure that the audio cable is fully 

plugged in. Note: To purchase an audio cable, see 

your local electronics store. 

Next, press the play button 

on your personal audio 

player. Adjust the volume 

level using the Vol increase 

and decrease buttons on 

the console or the volume 

control on your personal audio player.

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your 

goal is to 

burn fat or to 

strengthen your 

cardiovascular 

system, the key 

to achieving the 

best results is 

to maintain the 

proper heart 

rate during your 

workouts. The optional chest heart rate monitor will 

enable you to continuously monitor your heart rate 

while you exercise, helping you to reach your personal 

fitness goals. To purchase a chest heart rate moni-

tor, please see the front cover of this manual.

Note: The console is compatible with all BLUETOOTH 

Smart heart rate monitors.

Summary of Contents for 23937.0

































Reviews: