Symptom
Cause And Check
Solution
E00
Safety Key not in the position
Re-locate the safety key in the correct position
E01
Controller communication error
A: Check the Main Controller Wire
B: Replace the controller
E02
Motor communication error
A: Check the wire from motor to controller
B: Replace the controller
C: Check the power voltage if 50% lower than rate
voltage
E03
No speed signal
A: Check speed signal wire if connected properly
B: Replace the speed signal wire
C: Replace the controller
E04
Incline Motor communication error
A: Check the wire from incline motor to controller
B: Replace the incline motor
C: Replace the controller
E05
Over current protector
A: Over loading or over resistance
B: Replace controller
E06
Motor Open Circuit
Connect the Motor link
E08
Driver Error
Replace the driver
E09
Treadmill is folded
Unfold the treadmill, then press start key.
Maintenance
Trouble Shooting
26
