manualshive.com logo in svg

Pro-face PS-4600 Series, User Manual

Share
Download
Pro-face PS-4600 Series User Manual Download Page 83

PS-4600 Series User Manual

83

PIRQE

Option for setting the PIRQ E.

Auto

Automatic assignment by the BIOS 
and operating system.

IRQ3, IRQ4, 
IRQ5, IRQ6, 
IRQ10, 
IRQ11, 
IRQ14, 
IRQ15

Manual assignment.

PIRQF

Option for setting the PIRQ F.

Auto

Automatic assignment by the BIOS 
and operating system.

IRQ3, IRQ4, 
IRQ5, IRQ6, 
IRQ10, 
IRQ11, 
IRQ14, 
IRQ15

Manual assignment.

PIRQG

Option for setting the PIRQ G.

Auto

Automatic assignment by the BIOS 
and operating system.

IRQ3, IRQ4, 
IRQ5, IRQ6, 
IRQ10, 
IRQ11, 
IRQ14, 
IRQ15

Manual assignment.

PIRQH

Option for setting the PIRQ H.

Auto

Automatic assignment by the BIOS 
and operating system.

IRQ3, IRQ4, 
IRQ5, IRQ6, 
IRQ10, 
IRQ11, 
IRQ14, 
IRQ15

Manual assignment.

Reserve Legacy 
Interrupt 1

The interrupt reserved here is not made 
available to a PCI or PCI Express device.

None

No interrupt is assigned.

IRQ3, IRQ4, 
IRQ5, IRQ6, 
IRQ10, 
IRQ11, 
IRQ14, 
IRQ15

IRQx is reserved.

Reserve Legacy 
Interrupt 2

The interrupt reserved here is not made 
available to a PCI or PCI Express device.

None

No interrupt is assigned.

IRQ3, IRQ4, 
IRQ5, IRQ6, 
IRQ10, 
IRQ11, 
IRQ14, 
IRQ15

IRQx is reserved.

BIOS Setting

Description

Setting Op-
tions

Effect

Summary of Contents for PS-4600 Series





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands