Pro-face PS-3700A, User Manual, Page: 9 / 131

8
CE Marking Notes
The PS3700A-T41-ASU-P41 unit is a CE marked, EMC compliant product.
<Complies with the following Standards>
„
Safety
EN60950
„
EMI
EN61000-6-4 (Group 1, Class A)
„
EMS (EN61000-6-2)
EN61131-2, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11,
EN61000-4-12
„
FCC
47 CFR Part 15 Class A
If the following requirements are not met, the PS-A may fail to meet EN60950 standard requirements.
• The PS-A must be used as a built-in component of an end-use product.
• Use the PS-A indoors only.
• When connecting the PS-A’s power cord, be sure to use a cord that is appropriate for the current and voltage used and
that has conductive wires that are 0.75 mm
2
or larger.
• When using the PS-A in an end-use product, be sure to install the PS-A unit’s power cut-off switch where the operator
can easily reach it.
• There is a danger of explosion if the backup battery is incorrectly replaced. This battery should be replaced only with
same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
• Be sure the PS-A unit’s enclosure is an EN60950 approved sheet steel structure.