Pro-face PS-3700A User Manual Download Page 85

Page: 85 / 131

Compact Panel Computer PS-3700A (Pentium

4M - 1.7GHz Model) User Manual

5-2

5.1

RAS Features

5.1.1

PS-A RAS Features

RAS (Reliability, Availability, Serviceability) features include a variety of useful system performance moni-

toring features, with the main feature being device monitoring. These features are designed to improve overall

system reliability.

Types of Monitoring

The PS-A unit supports the following Alarm Monitoring features.

Alarm Processing

The PS-A provides the following alarm processing (processing or external output signals) in response to the

previous page's alarms, or to external signal input.

System Monitor

The System Monitor feature (software utilities) allows users to enable or disable the monitoring of any of the

above monitoring items, as well as to individually set alarm processing settings.

In addition, System Monitor includes a dynamic link library (API-DLL) feature that gives other applications

access to RAS features.

Error Monitoring

Power Voltage Alarm

Cooling Fan RPM Alarm

Internal Temperature Alarm

Watchdog Timer Timeup

Touch Panel Alarm

Backlight Alarm

SMART Alarm

External Output Signal

General Signal Output (DOUT 4-bit, DOUT0 to DOUT3)

Types of Processing

LED Indicator (2 colors, 1 lamp)
Pop-up Message Output
Buzzer Output
System Shutdown
System Reset

SEE

5.2 System Monitor/RAS Features (page5-6)

Summary of Contents for PS-3700A




































































































































Search results

Summary of Contents for PS-3700A

Reviews:

Pro-face PS-3700A, User Manual, Page: 85 / 131

Search results

Summary of Contents for PS-3700A

Reviews: