Pro-face PS-3700A, User Manual, Page: 43 / 131

Compact Panel Computer PS-3700A (Pentium
®
4M - 1.7GHz Model) User Manual
2-16
2.3 Wiring the PS-A
2.3.1 Connecting the Power Cord
Insert the power cord (AC inlet plug) into the PS-A’s bottom face AC connector.
„
Installing the AC Power Cord Clamp
‹
Attaching the AC Power Cord
(1) Open the AC Power Cord Clamp and insert the AC Power Cord as shown in fig. 1. Then, close the Cord
Clamp until it clicks into place and locks around the AC Power Cord Collar.
.
*1 L : AC Input Terminal-live line
N : AC Input Terminal-neutral line
FG : Ground Terminal connected to the PS-A chassis
To avoid an electric shock, check that the PS-A’s power supply is turned OFF, via a breaker,
or similar unit before connecting the PS-A’s power cord to the AC connector.
To avoid the dangers of fire, electric hazards and equipment damage, be sure to use only
the specified voltage when operating the PS-A.
• The Power Cord included in the PS-A unit's package is designed only for
AC100V or AC115V use. Any other voltage will require a different cord.
• Be sure to connect the power cord only after confirming that
the PS-A unit rear face power switch is turned OFF.
• The Cord Clamp has four teeth for locking. These are to adjust the amount of grip used to hold
the AC Power Cord Collar.
N
FG
L
AC Connector *
1
AC Plug Collar
Cord Clamp
AC Plug
Figure 1