Pro-face PS-3700A, User Manual, Page: 76 / 131

Chapter 4 Setting up Your PS-A Unit
4-5
„
Installing the HDD Unit
After opening the PS-A unit’s packing box, check that a hard disk unit is installed. If it is not, you will need to
install it.
„
Setting Up the PS-A Unit’s System Information
If your PS-A unit does not have a pre-installed HDD, you will need to install an HDD unit and then configure
that drive’s system information. Be sure to check that the system successfully recognizes the drive.
„
Setting Up an HDD with Pre-installed OS
Follow the setup procedures given in the Pre-installed Type HDD Unit Installation Guide.
‹
PS-A Hard Disk Data
Setting up the PS-A unit’s utilities will create a [Proface] folder on the C drive. The following diagram
describes the configuration of this folder.
SEE
Pre-installed HDD Unit Installation Guide
SEE
Pre-installed HDD Unit Installation Guide
• The actual organization may differ depending on your PS-A unit’s OS.
• Setting up the PS-A unit’s utilities automatically copies the hardware control driver (Psamon.sys,
Blctrl.sys) to the system folder.
• To use USB 2.0, Windows
®
2000 Service Pack 4 or Windows
®
XP Service Pack 1 or later is
required.
[Proface]
[Audio] Audio Driver
[Blsaver] Backlight Control Screen Saver
[Chipset] Chipset Driver
[Disp] Backlight Control Console Application
[Display] Graphic Accelerator Driver
[Keyclick] Keyboard Emulation Application
[PsaApi] API-DLL
[Setup] CD Image
[Shutdown]
[Client] Remote Shutdown Client
[Sysmon] System Monitor/RAS Application
[UPDD] Mouse Emulator