Pro-face PS-3700A, User Manual, Page: 32 / 131

Chapter 2 Hardware Installation
2-5
(3) Insert the expansion board (commercial-type PCI) into the expansion board connector, and secure it in
place using the filler panel’s screw. The necessary torque is 0.5N
•
m to 0.6N
•
m.
(4) Replace the rear cover and secure it in place using the five (5) attachment screws.
• The maximum size allowed for an expansion board is 240mm [9.44in.] x 106.68mm [4.2in.].
When using an expansion board of this size, be sure to secure it in place using the expansion
board support cover. Before the rear cover is closed, as explained in step (4) above, remove the
expansion board support cover screw and be sure the expansion board support cover is detached.
Next, replace the rear cover, and then secure the expansion board support cover to the rear cover
using the expansion board support cover screw. The necessary torque is 0.5N
•
m to 0.6N
•
m.
Expansion Board
Connector
Expansion Board
(Commercial type)
Expansion Board
Support