Pro-face GP-2300 Series User Manual Download Page 58 | Manualshive

Page: 58 / 61

Pro-face GP-2300 Series User Manual Download Page 58

GP-2300/2301 Series User Manual

6-1

When the surface or the frame of the display gets dirty, soak a soft cloth in water
with a neutral detergent, wring the cloth tightly, and wipe the display.

6.1

Regular Cleaning

6.1.1 Cleaning the Display

6.1.2 Installation Gasket Check/Replacement

The installation gasket protects the GP and improves its water resistance. For
instructions on installing the GP’s gasket, refer to

Chapter 3 “Installation and Wiring”

A gasket which has been used for a long period of time may have
scratches or dirt on it, and could have lost much of its water resis-
tance. Be sure to change the gasket at least once a year, or when
scratches or dirt become visible.

Installation Gasket Attachment Procedure

1) Place the GP on a flat,

level surface facing the
display face downwards.

2) Remove the gasket from

the GP.

Chapter

6 Maintenance

•

Do not use paint thinner, organic solvents, or a strong acid com-
pound to clean the unit.

•

Do not use hard or pointed objects to operate the touch-screen panel,
since it can damage the panel surface.

1. Regular Cleaning

2. Periodic Check Points

3. Replacing the Backlight

«
...
56
57
58
59
60
...
»

Summary of Contents for GP-2300 Series






























































Reviews:

No comments