Pro-face FP3900-T41, User Manual

Page: 65 / 79

FP-3900T Series User Manual
5-2
5.1 Touch Interface Data
The FP-3900T Series units use an analog type touch panel. This touch panel needs a calibration program to
adjust the actual touch position.
The screen display origin point, with the resolution of 1280 × 1024 for FP-3900T Series units, is normally at
the upper left corner of the screen. Therefore, a software to convert the touch coordinates to display
coordinates is needed.
„
Touch Panel Coordinate Data
(1) Resolution
Both the X and Y coordinates have a resolution of 1024.
The origin point (0,0) is located in the upper left corner of the screen.
<FP-3900TSeries>
OS Touch I/F Program Calibration
Windows
®
NT4.0 SP6a or newer ver.
Windows
®
2000
Windows
®
XP
UPDD
*1
*1 The UPDD is used for both English and Japanese.
Feature included in
UPDD
• Visit our support site below and download the mouse-emulation software
(UPDD).
Digital Electronics Corporation’s support site - Otasuke Pro!
http://www.pro-face.com/otasuke/
• For use of USB for sending touch data, the number of the calibration point of
mouse emulation software should be 9. (The initial setting is 4.)
If you don't change the setting values, the touch position may not be accurate, a
little off the point.
Touch Panel Coordinates
(0,0)
Display Coordinates
(0,0) Touch Panel Coordinates
(1023,1023)
Display Coordinates
(1279,1023)