Pro-face FP3900-T41, User Manual

Page: 49 / 79

FP-3900T Series User Manual
3-8
‹
Wiring
Use the following wiring for FP. Those are Phoenix Contact products.
‹
Connecting the Power Cord
When connecting the AC type power cord, be sure to follow the procedures given below.
(1) Confirm that the power cord is unplugged from the power supply.
(2) Push the Opening button by a small and flat screw driver to open the desired pin hole.
(3) Insert each pin terminal into its each hole. Release the Opening button to clamp the pin place.
(4) After inserting all three pins, insert the Power Plug into the Power Connector at FP. Fix the plug with
two(2) minus screws.
Recommended Drivers SZS 0.6X3.5 (1205053)
Recommended stick end terminal
AI 0.75-10GY(3201288)
AI 1-10RD(3200182)
AI 1.5-10BK(3200195)
AI 2.5-12BU(3200962)
Crimp tool for recommended stick end terminal CRIMPFOX ZA 3 (1201882)
• Confirm that all wires are connected correctly.
• The torque required to tighten these screws is 0.5 N•m - 0.6 N•m.
• To prevent the possibility of a terminal short, use a pin terminal that has an
insulating sleeve.
L
N
FG
AC power supply cord
Opening Button