Pro-face FP3900-T41, User Manual

Page: 58 / 79

Chapter 4 Setting up and Adjusting the FP unit
4-5
• In the OSD, pressing the button applies the set value and enables the
setting. The set value won't be canceled unless the power is turned OFF or
the value is reset.
If the power is turned OFF without saving the set value, that data will
disappear. The last saved data will be read into the system when the FP
starts. To enable the changed value, be sure to press the button.
• All the setting values, even though in process of the OSD settings, will be
retained in condition of letting the OSD leave more than 30 seconds or by
pressing the button. The OSD will keep those values and make them
effective until power-off or a Reset command input.