Pro-face FP3900-T41, User Manual

Page: 6 / 79

5
Connecting the FP to a PC
The FP-3900TSeries units are designed as a standard SXGA display.
Be aware that some types of SXGA equipment may not be within the ranges specified in this document, and, therefore,
cannot be connected to the FP.
Also, if you change your PC’s SXGA board, there is the possibility that the new board may not be able to be connected to
the FP.
SEE
2.3 Interface Specifications (page2-5)
• When a signal timing value not compatible with this device is entered, or if the
entered timing is larger than can be displayed by the dot clock, an “Out of range”
message is displayed. If this occurs, be sure to read your computer’s manual
and enter a value that is compatible with this device.
• If no signal (synchronized signal) is entered, a “No signal” message is displayed.