FP2600-T11 User Manual
i
1) It is forbidden to copy the contents of this manual, in whole or in part, except for
the user's personal use, without the express permission of the Digital Electronics
Corporation of Japan.
2) The information provided in this manual is subject to change without notice.
3) This manual has been written with care and attention to detail; however, should you
find any errors or omissions, please contact Digital Electronics and inform them of
your findings.
4) Please be aware that Digital Electronics is not responsible for any damages result-
ing from the use of our products, regardless of article 3 above.
5) Specifications set out in this manual are for overseas products only, and, as a result,
some differences may exist between the specfications given here and the Japanese
ones.
All Company/Manufacturer names used in this manual are the registered trademarks of
their respective companies.
© 2001, Digital Electronics Corporation
<Note>
Preface
Thank you for purchasing Digital’s TFT type color display panel, the 'FP2600-T11'
(hereafter referred to as the FP unit).
The FP unit is a TFT type color liquid crystal display monitor for IBM-PC compatible
personal computers (SVGA mode).
Please read this manual completely to insure the correct use and complete understand-
ing of the FP unit's functions. The FP's analog interface is designed for use with
standard VGA mode. Please be aware that this unit may not be able to be connected
with nonstandard VGA modes. For more details, please refer to this manual's "PC
Connectivity Notes" section.
The term FP2600-T11 refers to the following unit:
FP2600-T11
(AC 100V type)
