16
LIMITED WARRANTY
Pro Charging Systems, LLC (PCS) makes this Limited Warranty only to the original retail purchaser.
PCS warrants this battery charger for three years (unless the charger is used outside of the USA or the charger has a part number with
the RM designation) from the date of retail purchase against defective materials and/or workmanship.
*
-
RM suffix refers to
“
Restricted Markets
”
such as Rental applications and Heavy Industrial applications.
These chargers, along with any chargers used
outside of the USA, will have a warranty period of 18 months from the date of retail purchase against defective materials and/or
workmanship.
CR refers to
“
Certified Reconditioned
”
and designates a 1 year warranty.
If such defects should occur, this unit will either be repaired or replaced at the discretion of the manufacturer.
It is the responsibility
of the original purchaser to return the charger along with proof of purchase, transportation, and/or any mailing or handling charges
prepaid to the manufacturer or its authorized representative.
Chargers that are purchased more than two years beyond the date of
production will automatically have a warranty start date that will be the two year anniversary of the production date.
This limited warranty is void if the product is misused, improperly maintained, handled carelessly or incorrectly operated.
Additionally, this warranty is void if the charger is disassembled, the charger
’
s charge cables are cut, the power cord is cut off, the
charger is altered without authorization from PCS, the serial number is removed, or repair is attempted by anyone other than an au-
thorized representative.
PCS makes no other warranty other than this limited warranty and expressly excludes any implied warranty, including warranty for
any incidental or consequential damages.
This is the only expressed limited three year warranty authorized by PCS and does not au-
thorize anyone to assume or make any other obligation towards the product other than this three year Limited Warranty.
Some
states do not allow limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Please call Pro Charging Systems, LLC for full warranty information at
(615.471.5300)
.
VEHICLE LOCKOUT CONTROL OPTION
INHIBIT (LOCKOUT) WIRING
SW1
WHITE
BLACK
When charging, SW1 is open.
When not charging SW1 is closed.
SW1 maximum current = 3Adc
AC CONVENIENCE PORT ACCESORY OPTION
•
This option is mounted on equipment or vehicle body and allows an A.C. extension Cord to
connect to it, where the charger is mounted deep inside the vehicle. It provides a 5
-
LED
Status display. This option is not available for
‘
R
-
Series
’
charger products.
For component
information, please scan the following QR code:
•
The circuit depicted above, when applied as an application with the equipment or vehicle, will prevent the
operating of that equipment or vehicle while the charger is connected to A.C. Utility Power.
•
The White connection on the vehicle side is connected to battery positive (+). Max voltage 100VDC.
•
The Black connection on the vehicle side is connected to the lockout contactor.
•
For products with
‘
Pigtail
’
Lockout Inhibit Cable already installed, a tethered output pigtail is in-
cluded on some models and exits the front of the charger.
For component information, please
scan the following QR code: