background image

12

 

MULTI

-

STAGE CHARGE (TYPICAL) WITH LED DISPLAY

 

 

For additional  information including a detailed description of LED indications and functionality, 
please scan the following QR code:

 

 

 

 

MULTI

-

STAGE CHARGE (TYPICAL) WITH LCD DISPLAY

 

• 

Use of an LCD display converts messages from what is otherwise a blinking LED into readable characters.  There-
fore, refer to the previous section for a description of a typical charge stage. 

 

For additional information including a detailed description of  LCD messages and functionality, 
please scan the following QR code:

 

 

 

ERROR CODE DESCRIPTION

 

There are numerous Error Codes available to alert the user to possible battery issues or charger related issues.  For 
chargers utilizing an LED display, the error codes will be displayed by flashing LED

s.  For chargers equipped with LCD 

displays, the Error Code Number will be displayed.

 

During an Error Code Annunciation, the charge cycle has terminated its normal operation, prematurely. An abnormal 
charging condition was detected and charging stopped due to a Charge Error Condition. Refer to the following 

Charge Error Table

 for an extended description of the failure or condition and its possible remedy. Error Code Values 

1

-

31, which use the first flash pattern, are not highlighted. Error Code Values 32

-

64, which use the second flash 

pattern are highlighted in yellow. 

 

 

 

ALERTS

’ 

are highlighted in magenta. 

 

 

 

Power On

 

(Red)

 

Illuminates continuously  when AC POWER IS PRESENT.  

 

Shutdown

 

(Red)

 

Illuminates typically when used only during Error Decode Mode.  Refer to 

TROUBLESHOOTING IF FLASHING.

 

Detection

 

(Red)

 

Illuminates when battery not connected while powered by AC.   Refer to 

TROUBLESHOOTING IF FLASHING.

 

Charging

 

(Yellow)

 

Charge Status Indicator—May illuminate steady or flash during the Multi

-

Stage 

Charge Process.

 

Charged

 

(Green)

 

Illuminates during the  Finishing  and Float/Maintenance Stages.  When flashing 
in conjunction with a continuously illuminated Power On Red LED, it is signifying 
and alert.  Refer to Error Code Description for alert definition.

 

Summary of Contents for DUAL PRO Patriot PS2420

















Reviews: