10.2. Selection of the desired analog output value
85
Menu item „4…20 mA/0…10 V“ allows you to chose whether you wish the analog output
signal to be a current- (4…20 mA) or a voltage (0…10 V) signal.
1.
To see the list of available output signals
select "4…20 mA/0…10 V" (if the field is not
already highlighted this will be the case once you have made the selection) and confirm
your
choice by pressing
„Enter“
.
The following screen appears, which allows you to set the desired output and confirm
with „Enter“ .
1
2
Source
Current / Voltage
Setpoint 4mA/0V
Setpoint 20mA/10V
Current Mode
Voltage Mode
Summary of Contents for TPK 21
Page 115: ...15 APPENDIX 110...
