15.3. EG-Conformance Details
15.4. Guarantee
115
E M C
EU-Declaration of Conformity
marking
We, Manufacturer/Representative
(full address)
PRO air GmbH
Peter-Müller-Strasse 29a
80997 München
declare that the product
(description of the apparatus, system, installation to which it refers)
Drucktaupunkt und Druckmessgerät Serie / Pressure dew point and pressure monitoring device
TPK
The object of the declaration described above
is in conformity with the relevant Union harmonisation legislation:
Directive 2014/30/EU
Standards to which conformity is declared:
EN61326-1
:2013
Electrical equipment for measurement, control and laboratory use -
EMC requirements
Part 1: General requirements
EN61000-3-2
:2014
Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment input current
up to and including 16A per phase)
EN61000-3-3
:2013
Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems, for equipment with rated current up to 16A per phase
and not subject to conditional connection
Signed for and on behalf of:
Place:
_________________
Date:
_________________
Signature:
Name:
Function:
_________________
_________________
_________________
The declaration of conformity is issued under the sole responsibility of the manufacturer.
The declaration of conformity must be translated in the EU-languages where the product will be sold.
Date: 08.08.2017
PKM electronic GmbH
Ref.-No.: 17/07-0108
Based on Test report, Ref.-No.: 17/07-0108
ACCREDITATION/DESIGNATION:
- DAkkS D-PL-17379-01-00
- KBA-P 00088-96
_____________________________
Authorized Signature
The above-mentioned manufacturer shall
keep the necessary conformity-assessment
documentation ready for inspection.
Munich, 15/04/2017
Ralf Kotzock
The quality of our products is constantly monitored as part of our QM system, according to ISO 9001.
The devices are thoroughly tested and configured prior to shipping. If you still have cause for
complaint, we will rectify the defect free of charge within the warranty period of 24 months, provided
that it may be proven that the defect is due to an error on our part.
Warranty services are provided on the condition that you inform us of the defect without delay and
within the warranty period.
The warranty will be deemed void if the device is not used for its intended purpose, not installed
according to these instructions or has been damaged due to improper treatment or interference with
the device. Furthermore, travel costs, defective sensors and probes and calibration services are
excluded from the warranty.
The warranty will also become void if the device has been opened or disassembled. The serial number
on the product label must not be changed, damaged or removed.
If necessary repairs are carried out in addition to the warranty services, these will be free of charge.
However further services will be billed, including postage and packaging costs.
No further-reaching claims for liability or damages will be accepted, unless required by law.
Summary of Contents for TPK 21
Page 115: ...15 APPENDIX 110...
