7.2 Application of a pre-filter / water separator
7.3 Mounting examples
9
Depending on the state of the compressed-air system and distribution network, it is possible
for dirt, condensate or oil to leak out from the measuring point. In order to avoid damage to
the probe in such critical areas of application, a water separator with a fine filter can be
connected upstream of the device. The upstream components must not alter the moisture
content of the air or unduly impair the response. We can provide you with a list of suitable
components upon request.
The device is suitable for a variety of applications. The flexible design of the measuring
chamber allows it to be easily adapted to the intended use:
Connection to a 7.27,2 mm NW quick coupler:
This connection can be quickly and easily performed
within minutes, without any complex installation.
-
The device is connected directly to the coupling, and no
further mounting is required.
Connection of PTFE - hose with the measuring device:
Please insert the the hose-end without plug into the
„INLET“ port of the device.
Please notice urgently the pressure specification
(16 bar/ 230 psi) to avoid damage inside the device.
Summary of Contents for TPK 21
Page 115: ...15 APPENDIX 110...
