manualshive.com logo in svg

PRO AIR TPK 21, Functional Description And Operating Instructions

Share
Download
PRO AIR TPK 21 Functional Description And Operating Instructions Download Page 14

 

7.6  Connection of power supply

 

 

 

 
 
 

   

10

The device is operated with extra-low voltage. It is possible to use the 

device via integrated battery with our permanent power supply 

connection. A suitable mains adapter is provided to use the device for 

long term measurements.  

The power supply unit is plugged into one of the lower two M12 sockets 
(„Analog Output“ or „Modbus") on the right-hand side of the device 

and screwed into place. 
No complex electrical installation is necessary, and the device is 

immediately ready for operation 

The AC adaptor with Europlug is of a high-quality design with a wide-

range input. It is suitable for a 90 - 240 V power supply and is therefore 

suitable for Europe-wide use. 

Connection Diagram FGPx remote probe

Follow the guidelines for plugs and 

sockets!!

Do not try to force the connector 

when plugging it in. 

 

 

Connection option 2

Connection option 1

Connection option 1

Connection option 2

Summary of Contents for TPK 21
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands