Operating instructions SPEEDY 4all & 4you & 4teen
46
25.2 Integral brake
25.2.1 Opening and closing the brake
Figure 132: Overview of terms
Closing the brake
is carried out by pressing
the front part of the control element to the right
or left outwards until the brake element rests
against the tyre. Then press the control
element (on the front part) towards the tyre
until the control element rests against the
brake element.
Figure 133: Integral brake open, closing is carried
out by pressing the control element outwards
When the brake is closed, the brake element is
positioned vertical to the brake mount.
Figure 134: Brake element vertical to the brake
mount
Please note that the integral brake is a
parking brake which may only be applied when
the product is at a standstill. This is not a
service brake which is suitable for reducing
speed.
To open the brake, press the front part of the
control element inwards (away from the
wheel).
Figure 135: Integral brake closed, opening is carried
out by pressing the control element inwards
When opening and closing the brakes,
make sure that the control and brake element
are never grasped. Press the brake only using
one finger or with the ball of your hand on the
front part of the control element.
Front part of the
brake element
Brake element
Press the front part
of the brake element
to the outside
Press the front part
of the brake element
to the inside
•
Control element
Control element rests
against the brake element
