Prism Medical A205, User Manual

Page: 16 / 44

A205 Mobile Hoist User Manual Page 16 of 44 Part No. 999003 / Rev.2 / Nov 2017
Assembly Instructions (continued…)
Final assembly (continued…)
4. To install the battery, you will need to press the battery against the
bracket and slide it down until it sits straight on top of the control box as
shown in (fig 20.) Make sure to secure the battery box by latching the
battery lock into the bracket as shown in (fig 21.)
5. Connect all the cables to the control box as shown in the picture below.
a. Connect the Hand Control connector to the large circle on the left
side of the control box as shown in (fig 22.)
b. Connect the Up/down Actuator Cable connector to the second
circle (Marked No. 1) from the left side of the control box as
shown in (fig 23.)
c. Connect the Leg Spreading Actuator Cable connector to the third
circle (Marked No. 2) from the left side of the control box as
shown in (fig 24.)
d. Connect the Mains Cable/Power Cord to the rectangular outlet on
the control box as shown in (fig 25.)
fig 21.
fig 20.
fig 23.
fig 22.