Prism Medical A205, User Manual

Page: 7 / 44

A205 Mobile Hoist User Manual Page 7 of 44 Part No. 999003 / Rev.2 / Nov 2017
5. Component list
The following components are included with your new Prism A205
Aluminium Mobile Hoist system:
•
Prism A205 Aluminium Mobile Hoist
•
Hand Control
•
Mobile hoist Integrated Charger
•
Charger Cable
•
Owner’s Manual
•
Multi-Function Spanner
•
5 mm Hex Allen Key (Short Arm)
•
4 mm Hex Allen Key (Short Arm)
•
3 mm Hex Allen Key (Short Arm)
SLINGS: If a sling has been supplied with the mobile hoist, then please
refer to the instructions included with the sling.
ACCESSORIES: If additional accessories such as a weigh scale have been
supplied with the mobile hoist, then please refer to the
instructions included with those items.
IMPORTANT : Before initial use, the mobile hoist unit must be charged
for 4 to 5 hours. Refer to section titled “Charging Instructions” on page
18
The Hand control must also be connected to the mobile hoist. If it is not
connected, then please refer to the section titled “Assembly
Instructions” within pages 12 to 17
Carry Bars
Although Prism Medical supplies carry bars specifically to be used with
the associated devices it manufactures, there is no reason that other
manufactured carry bar systems cannot be used BUT they must be done
so after a full risk analysis has been carried out for its use on the Prism
hoist system to ensure safe use can be established.
Carry Bar connection points
The carry bars manufactured by Prism Medical associated for use with
this device, incorporates two fixing points which is not new technology
and the fixing can be derived by user by means of a simple connection
made by the sling to the carry bar itself. This connection system is used
throughout the industry in various designs but all act as the means to
hold the sling and user in place through operation of the device whilst in
use.