Transactive Xtra User Manual
Page
20
of
40
Part No. 999015 / Rev.2 / Nov 2017
10.
LCD display functionality
Default Display Modes:
The hoist unit can be set to either of the following as the ‘Default’
display mode:
a.
Battery Level (the factory setting for the Default Display Mode)
or,
b.
Number of Operations
To change from one operating mode to another please call your local
service technician.
In A, Battery Level Mode, the hoist will:
1.
Display the word ‘Battery’ with the percentage charged (in 10%
increments) in the top row of the display (e.g. ‘Battery Level 60%’)
2.
Display a ‘Bar Graph’ of the battery level in the second row of
the display by displaying the appropriate number of fully
blackened rectangles as in the following diagram:
Note: As the hoist is initially switched on, the level of battery
charge displayed may be incorrect. However, as soon as the hoist is
actually operated, the charge level will update to the correct level.
In B. Number of Lifts Mode, the hoist will:
1.
Display the word ‘Lifts’ with the number of lifts completed in
the top row of the display (e.g. Hoists 500.) and a bar graph to
indicate the battery level as in Battery Level Mode:
In any Default display mode. if the battery levels fall below 25%, the hoist
will go into Low Battery Mode. The hoist will then:
2.
Make an audible beeping sound every ten (10) seconds.
3.
Flash ‘Low Battery’ in the first line.
4.
The bars indicating charge level will flash on and off.
Summary of Contents for Transactive Xtra
