Prior Scientific OptiScan II ES107, Operating Instructions Manual

Page: 88 / 94

OptiScan II ™
85
Instructions for using Windows HyperTerminal Emulation Program
(Windows NT) for communication to Prior Controller.
1) Click Start, then Programs, then Accessories, then HyperTerminal.
2) Select the “HyperTerminal” icon.
3) In the “Connection description” dialog box enter filename e.g. prior, select an icon and
press OK.
4) In the “Connect to” dialog box enter Phone Number (if required) and Select COM1
or COM2 as appropriate and press OK.
5) Enter the following parameters in the Port Settings box ;
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
6) Press OK button.
7) Select File, Properties and Settings tab.
8) Press ASCII Setup...
9) Select “Echo typed characters locally” and “Append line feeds to incoming line ends”
(you should find that “Wrap lines that exceed terminal width” has already been
selected).
10) Press OK
11) Press OK.
Instructions for using Windows HyperTerminal Emulation Program (Windows
XP) for communication with a ProScan Controller.
1) Click Start, then Programs, then Accessories, then Communications and finally
HyperTerminal.
2) A window called ‘Default Telnet Program’ will appear, close the box and
ignore.
3) Enter filename e.g. priorterm, select an icon and press OK.
4) For the "Connect using" option, select COM1 or COM2 as appropriate.
5) Press OK.
6) Enter the following parameters in the Port Setting Box,
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com