254764-001 Rev B 5
PREFACE
Proprietary Statement
This PRINTRONIX SV 2 Series Operator’s Guide contains proprietary information of PRINTRONIX. It is
intended solely for the use of parties operating and maintaining the equipment described herein. This
information may not be used, reproduced, or disclosed to any other parties for any other purpose without
the express written permission of PRINTRONIX.
FCC Notice
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency energy
and, if installed and used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, the user is encouraged to try
to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the computer and receiver.
-
Connect the computer into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment.
Statement of FCC Compliance: Canada
This Class B digital apparatus meets all requirements of the Canadian interference-Causing Equipment
Regulations.
Cet appareil numénque de la classe B respecte toutes les exigences du Règlement sur le maténel brouilleur
du Canada.
CE:
The unit will contain cTUVus and/or CE quality assurance labels.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with this operator’s manual, may cause harmful interference to radio communications.
Operating this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the problem at his own expense.
Statement of RoHS Compliance:
All SV 2 Series units with appropriate part numbers conform to requirements specified in DIRECTIVE
2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Use with Safety Agency-Listed Equipment (UL, TUV, VDE, etc)
The SV 2 Series should be used only with printers, applicators, etc. that are Safety Agency listed. The SV
2 Series is intended to be supplied by a Safety Agency Listed power supply (QQGQ) or (EPBU) or receives
power from the host unit (Printer), output rated 5Vdc, minimum 300mA maximum 1A.
Documentation Updates
PRINTRONIX strives to provide the best possible documentation. This manual, or any of our manuals,
may be updated without notice.
