254764-001 Rev B 39
~PLpii
List all Port setup parameters. (Parameters are set by the ~PB command.)
pii= Three decimal digits representing:
Port- p
ID- ii
~PT#
Show <Port 1 to 8> status and all the Port Parameters (Parameters are set by the ~PB command.)
Transmission is in the following format for command ~PT1:
1)
~PT
2)
hexadecimal value ‘4’ - identifies the beginning of the datapacket response.
3)
A list of text strings like the one shown in the example. Each string is terminated by a two character
sequence: ‘\r’ (the carriage return character), ‘\n’ (the line feed character).
4)
hexadecimal value ‘5’ - identifies the end of the datapacket response
5)
1
Example return using Scanvision:
Port Status:
Global HW: 001
Global SW MIRR: 001
PORT STATE: 000
PASS/FAIL PARAMETERS:
001 - 255 255
002 - 037 100
003 - 255 255
004 - 000 100
005 - 255 255
006 - 021 000
007 - 255 255
008 - 255 255
009 - 255 255
010 - 255 255
011 - 010 050
012 - 255 255
013 - 255 255
014 - 255 255
015 - 018 000
016 - 050 100
017 - 255 255
018 - 255 255
019 - 255 255
020 - 255 255
021 - 255 255
022 - 255 255
023 - 255 255
024 - 255 255
025 - 255 255
026 - 255 255