254764-001 Rev B 31
~HT
Display the verifier parameters
The format of the reply is when ~De0 is set: See ~De# command for an alternate reply choice.
1)
~H
2)
hexadecimal value ‘4’ - identifies the beginning of the datapacket response.
3)
A list of text strings like the one shown in the example. Each string is terminated by a two character
sequence: ‘\r’ (the carriage return character), ‘\n’ (the line feed character).
4)
hexadecimal value ‘5’ - identifies the end of the datapacket response
5)
T
Example: (The numbers of parameters reported varies with the commands included in the firmware
revision)
~H
{hex 4}
[~HS###]SOS= 048
[~HP###]Beam Shift= 000 000
[c]HIGHcal= 085
[c]LOWcal= 002
[~Sh##]= 000
[~Sl##]= 000
[c]SCfact= 045
[c]min cal= 024
[~HB#]baud= 005
[~LL]smt_decode= 471
[~LM##]chars= 032
[~LN##]num_bc= 001
[~LZ##]num_bc_exact= 000
[~LR#]No_Read_Enable=000
[~LF##]I25_Mod10_Chk=040
[~HQ#]output_mode= 000
[~HO#]oper_mode= 001
[~LA##]ansi= 000
[~LS##]min_scn= 002
[~LT#]sync_in= 001
[~LP#]sync_pol= 001
[~LX#]sync_typ= 002
[~LV##]sync_md= 001
[~PO#]port_sel= 005
[PC#]port_clear_md= 000
[Pt##]port_time= 099
[~LD##] %dec= 000
[~PR####]PRST= 000200
[~HL#]ladder_code= 000
[~HJ####]ladd_start= 0800
[~HK####]ladd_end= 1600
[~HC####]ana_len= 2600
[~HG####]ana_lenh= 1300
[~HN####]pana_len= 1300
[~HU####]freq= 400
[~HV###]GTLA_len= 199
[~HY###]snoise= 070
[~HX###]dist= 078
[~H=#]dyn_out= 000
[~H!###]zone_tol= 450
[~H@##]gt_%= 050
