10
www.printek.com
|
P:
888.211.3400
|
F:
269.
222.1229
|
E:
Wireless Configuration
This will display the current Wi-Fi configuration:
IP Address
– user defined. If Static Address Method is selected, type in the address the printer will use
on the network.
SubNetMask
– user defined. If Static Address Method is selected, type in the subnet mark of the
network.
GateWay
– user defined. If Static Address Method is selected, type in the gateway address of the
network.
WiFi
Port
– user defined. Type in the IP port to be used by the printer. (default value = 8023)
Address Method
– user selectable
Static – printer will always connect to the network using the IP address defined.
DHCP – printer will acquire an IP address from your network DHCP server
Personal Area Network –The printer will broadcast itself as a network connection. The Power LED will
flash off every two seconds while in this mode. The SSID will be the serial number of the printer.
When connecting to the printer, the passphrase is the printer’s serial number.
Personal Area Network mode can also be activated outside of the printer web page.
To enter Personal Area Network mode, press and hold the Power and Paper Feed buttons until the
Power and Alert LEDs light. Release both buttons, and the printer will restart in Personal Area Network
mode. To exit Personal Area Network mode, press and hold the Power and Paper Feed buttons until
the Power and Alert LEDs light. Release both buttons, and the printer will restart in normal Wi-Fi mode.
