7
www.printek.com
|
P:
888.211.3400
|
F:
269.
222.1229
|
E:
F. Control Panel
Control Panel
Power Button
Power Up
Power Down
Toggle IP over USB
on/off
Press & Release
Press & Hold
Press twice
Paper Feed Button
Advance paper
Print Setup Report
Press once
Press twice
Power & Status
(Green/Red)
Battery
(Yellow)
Alert
(Red)
Indication
On Off
On Booting
up
On Off
Off
Ready
On
Off
Flashing
Paper Error/Lid Open
Flashing Off
Off
Job
is
arriving
Flashing Off
Off
Job
is
printing
Flashing Off
Flashing
IP over USB active
Solid
Charging
Battery
Flashing
Battery
Low
Flashing Flashing
Flashing
Restart
the
printer
manually
Off
Off
Flashing
Restore the printer
firmware
Off
Off
On
Print head too hot
G. Performing a Printer Self-Test
With power on, press the paper feed button twice quickly.
H. Restore the Printer Firmware
1. When the Power & Status LED is off, and Alert LED flashing, you need to restore the printer
firmware. Turn on the printer and wait for around 30 seconds, the printer enters into configuration
mode, and you could download the firmware via web.
2. If any problem occurs during firmware upgrade, and the printer fails to work, you could restore the
printer firmware as such:
①You had better use external battery.
②Turn on the printer by holding both the feeding button and power button for five
seconds.
③ With
Power LED and Alert LED flashing, the printer enters into Configuration mode after 30
seconds.
④ You could upgrade the firmware via the web.
